Uniden D1660 English Owners Manual - Page 11

3. After the selected number of hours, the phone automatically exits silent mode. To exit silent mode manually, press and hold # again. ##If the phone is in silent mode and you turn off the answering system, the phone exits silent mode. Multihandset Features ##To use the features in this section, you need at least 2 handsets. ♦♦Your base supports a total of 12 cordless handsets: the one that came with the base and up to 11 DCX160 accessory handsets. ♦♦You must register accessory handsets to the base before using them. (Handsets that came packaged with the base are already registered.) ♦♦Handsets that aren't registered display a Not Registered message. For registration instructions, see p. 18, or see the accessory handset manual. ♦♦If a handset was ever registered to a base, you must reset it before it can register to a new base; see p. 18, or see the accessory handset manual. Conference Calling ♦♦When an outside call comes in, two handsets can join in a conference call with the outside caller. ♦♦To join a call that's already in progress, just press Talk/flash or Speaker. ♦♦To leave the conference call, hang up normally; the other handset remains connected to the call. Call Transfer To... Press... transfer a call Intercom/clear. The phone puts the call on hold and prompts you to select the handset you want to page. When the other handset accepts the call, you'll be disconnected (press Talk/flash to rejoin the call). cancel a transfer Talk/flash to return to the call. accept a Intercom/clear to answer the page and speak to the other transferred call handset. Then, press Talk/flash to speak to the caller. Privacy Mode To activate privacy mode on a call in progress, press Menu/select twice. As long as privacy mode is on, you'll see a in the display, and no other handsets can join your call. Privacy mode turns off automatically when you hang up; you can also turn it off by pressing Menu/select twice. 11