Uniden D1660 English Owners Manual - Page 13

Using the Answering System Answering System Options (Ans. Setup) You can set or change the answering system options from any handset. Just open the menu and select Ans. Setup. Select one of the following: Security Code Enter a 2-digit PIN so you can access your answering system from any touch-tone phone (see p. 15). Ring Time Set the number of rings (2, 4, or 6) before the system answers. Toll Saver makes the system answer after 2 rings if you have new messages or after 4 rings if you don't. Record Time Set the amount of time (1 or 4 minutes) callers have to leave a message. Choose Announce Only if you don't want the system to let callers to leave a message. Message Alert Have the system beep every 15 seconds when you have a new message. The alert stops after you listen to all your new messages or if you press any key on the base. Ans. Language Change the language of the system's voice prompts. Call Screen Turn on the call screen feature so you can hear callers as they leave messages on the base speaker (see p. 15). Ans. On/off Turn your answering system on or off. Record Greeting Record an outgoing message or greeting (see below). Greeting Options Switch greetings or delete your greeting (see below). Personalizing the Greeting Your personal outgoing message or greeting can be from 2 to 30 seconds long. If you don't record a greeting, the system uses a pre-recorded greeting: Hello, no one is available to take your call. Please leave a message after the tone. To... Record a personal greeting Follow these steps: 1. Open the menu with the phone in standby. Select Ans. Setup, then Record Greeting. 2. Press MENU/SELECT to start recording. Wait until the system says "Record greeting" before speaking. 3. Press Menu/Select to stop recording. The system plays back your new greeting. 4. To keep the greeting, press End. To re-record it, press Menu/select. 13