Uniden D1660 English Owners Manual - Page 17

Audio issues Possible solutions There's a lot of noise or static on the line xxCheck for interference from appliances (microwave ovens, TVs, etc.) or wireless devices (baby monitors, WiFi equipment, etc.). Move the handset or base away from the interference source. xxIf you use a telecoil hearing aid, turn on T-coil mode (see p. 7). xxIf you have any service that uses the phone line, add a DSL or telephone line filter (see p. 18). Caller ID problems Possible solutions No handsets display Caller ID information. xxLet calls ring twice before answering. xxMake sure your Caller ID service is active. Caller ID displays briefly xxYou may have to change the line mode. and then clears. Contact Customer Service for instructions. Multi-handset problems Possible solutions I can't transfer calls. xxReset the handset (see p. 18). Two handsets can't talk to a caller. xxSee if any handset is in Privacy Mode. A handset says Unavailable. xxMove the handset closer to the base. xxSee if any handset is in Privacy Mode. I can't register a new handset. xxReset the handset (see p. 18). xxSee if you have 12 registered handsets. Answering system problems Possible solutions The answering system does not work. xxMake sure the answering system is on. xxMake sure the base is plugged in. The system won't record messages. xxSee if Record Time is set to Announce Only. xxDelete messages (memory may be full). A handset can't access the answering system. xxSee if another handset is using the system. xxMake sure the phone is in standby. My outgoing message is gone. xxIf there was a power failure, re-record your personal outgoing message. I can't hear the base speaker. xxMake sure call screening is turned on. xxChange the base speaker volume. Messages are incomplete. xxIncrease the Record Time. xxDelete messages (memory may be full). The system keeps recording when I answer on an extension. xxYou may have to change the line mode. Contact Customer Service for instructions. 17