Uniden D1685 English Owners Manual - Page 16

To... Record a personal greeting Switch between greetings Delete your greeting Follow these steps from the base or a handset: 1. Open the menu with the phone in standby. Select Ans. Setup, then select Record Greeting. 2. Press MENU/SELECT to start recording. Wait until the system says "Record greeting" before speaking. 3. Press Menu/Select to stop recording. The system plays back your new greeting. 4. To keep the greeting, press PLAY/STOP on the base or press End on the handset. To re-record it, press Menu/select. 1. Open the menu with the phone in standby. Select Ans. Setup, then Greeting Options. 2. The system plays back the current greeting. Press Menu/select to switch greetings. Switch to your personal greeting; press delete on the base or Intercom/clear on the handset while the greeting is playing. Accessing the Answering System With the phone in standby, you can access the system Press MESSAGE/MUTE to start remote operation mode. from the base or remotely from any handset: ♦♦Only 1 station can access the system at a time. ♦♦During remote access: --If you do nothing for 30 seconds, the phone returns to standby. Use PHONEBOOK to 5:Stop Use CID to go to go back to the the next option: previous option: [ / /select] 4:Delete 1:Repeat 3:Skip 2:Play Press MENU/SELECT to choose the current option OR END to exit remote operation mode. --The phone beeps so you know it's waiting for the next command. --You can press the number key shown next to each command instead of scrolling through the screens. Getting Your Messages To... play new messages restart this message English - 16 From the base From a handset Press Play/stop. Press Message/mute. The system announces the number of new & old messages, then plays each new message (followed by the day and time if set) in the order it was received. Wait 5 seconds after the message begins, then press Phonebook. select 1:Repeat.