Uniden D1685 English Owners Manual - Page 18

2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby. 3. The system announces the time, number of 01 Repeat message messages in memory, and a help prompt. It 02 Play message beeps to indicate it's waiting for a command. 03 Skip message 4. When you hear beeping, enter a 2-digit command from the chart. Enter both digits within 2 seconds or the entry times out. ##If you don't press any keys for 15 seconds, the system hangs up and returns to standby. 04 Delete message 05 Stop playback 06 Turn the system on 09 Turn the system off 10 Hear help prompts Important Information Solving Problems If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover. General problems Possible solutions No stations can make or receive calls. xx Check the telephone cord connection. xx Disconnect the base AC adapter for a few minutes; then reconnect it. A handset can't make or receive calls. xx Move the handset closer to the base. A station can make calls, but it won't ring. xx Make sure the ringer is turned on. xx Make sure Silent Mode is turned off (see page 12). A handset is not working. xx Charge the battery for 15-20 hours. xx Check the battery connection. The phone keeps ringing when I answer on an extension. xx You may have to change the line mode. Contact Customer Service for instructions. Audio issues Possible solutions Callers sound weak or soft. xx Move the handset closer to the base or Range Extender. xx Keep the handset's battery fully charged. xx Increase the earpiece volume. English - 18