Uniden D1685 English Owners Manual - Page 17

To... From the base From a handset replay an earlier During the first 2 seconds of a message, message press Phonebook. select 1:Repeat. skip a message Press CID. Select 3:Skip. delete a message press Delete. While a message is playing, select 4:Delete. delete all messages With the phone in standby, press Delete; press Delete again to confirm. Not available. play old messages After the system plays all new messages, press Play/stop again. select 2:Play. stop playback Press Play/stop. Select 5:Stop. Screening Your Calls You can use the answering system for call screening. While the system takes a message, you can listen on the base speaker (if you turn on Call Screen) or from a handset. Only one handset can screen calls at a time. If another handset tries to screen calls, it beeps and returns to standby. To... From the base From a handset hear the caller leaving a message Listen to the caller over the speaker. Press Message/mute. answer the call Press speaker. Press Talk/flash. mute the call screen without answering* Press Play/stop. Press End or return the handset to the cradle. * If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. Using the System While You're Away from Home You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code. Programming a Security Code With the phone in standby, open the menu; select Ans. Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you're finished. ##Remember to make a note of your new security code! Dialing In to Your System 1. Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.) English - 17