Uniden D1780-4BT English Owner's Manual - Page 17

After you listen to your messages, the message icon turns off. If it doesn't, you can reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes. If you change voice mail providers, you can edit your voice mail number. Open the menu and select Global Setup/Edit Voice Mail. Using the Answering System Answering System Options (Answering Setup) You can set or change the answering system options from any handset. Just open the menu and select Answering Setup. Select one of the following: Security Code Ring Time Enter a 2-digit PIN so you can access your answering system from any touch-tone phone (see page 19). Set the number of rings (2, 4, or 6) before the system answers. Toll Saver makes the system answer after 2 rings if you have new messages or after 4 rings if you don't. Record Time Set the amount of time (1 or 4 minutes) callers have to leave a message. Choose Announce Only if you don't want the system to let callers to leave a message. Message Alert Have the system beep every 15 seconds when you have a new message. The alert stops after you listen to all your new messages or if you press any key on the base. Ans. Language Call Screen Change the language of the system's voice prompts. Turn on the call screen feature so you can hear callers as they leave messages on the base speaker (see p. 15). Ans. On/Off Turn your answering system on or off. Record Greeting Record an outgoing message or greeting. Greeting Options Switch greetings or delete your greeting. Personalizing the Greeting Your personal outgoing message or greeting can be from 2 to 30 seconds long. If you don't record a greeting, the system uses a pre-recorded greeting: Hello, no one is available to take your call. Please leave a message after the tone. English - 17