Uniden D1780-4BT English Owner's Manual - Page 20

Dialing In to Your System 1. Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.) 2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby. 3. The system announces the time, the number of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command. 4. When you hear beeping, enter a 2-digit command from the chart. 01 Repeat message 05 Stop playback 02 Play message 06 Turn the system on 03 Skip message 09 Turn the system off 04 Delete message 10 Hear help prompts ##If you don't press any keys for 15 seconds, the system hangs up and return to standby. Important Information Solving Problems If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover. General problems Possible solutions No handsets can make or receive calls. xxCheck the telephone cord connection. xxDisconnect the base AC adapter for a few minutes; then reconnect it. A handset can't make or receive calls. xxMove the handset closer to the base. A handset can make calls, but it won't ring. xxMake sure the ringer is turned on. xxMake sure Silent Mode is turned off (see page 15). A handset is not working. xxCharge the battery for 15-20 hours. xxCheck the battery connection. The phone keeps ringing when I answer on an extension. xxYou may have to change the line mode. Contact Customer Service for instructions. 20 - English