Uniden D3097 English Owner's Manual - Page 20

To... From the base stop playback Press Play/stop. From a handset Select 5:Stop. Screening Your Calls You can use the answering system for call screening. While the system takes a message, you can listen on the base speaker (if you turn on Call Screen) or from a handset. Only one handset can screen calls at a time. If another handset tries to screen the call, it beeps and returns to standby. To... From the base turn on Call Screen NA hear the caller leaving Just listen to the caller over a message the speaker. answer the call Not available mute the call screen without answering Press Play/stop. From a handset Press MENU/OK then select Ans. Setup/Call Screening menu. Turn call screen on or off. Press Mute/Delete. Press TALK/FLASH. Press END/CLEAR or return the handset to the cradle. If you mute the call screen, the system continues taking the message: it just stops playing through the speaker. Using the System While You're Away from Home You can also operate your answering system from any touch-tone phone. Before you can use this feature, you have to program a security code. Programming a Security Code 1. With the phone in standby, open the menu. Select Answering Setup, then select Security Code. 2. Use the number keypad to enter a two-digit security code (01 to 99). Press MENU/OK when you're finished. ##Remember to make a note of your new security code! Dialing in to Your System 1. Call your telephone number and wait for the system to answer. -- If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new messages and 4 rings if you don't. You can hang up during the third ring. -- If your answering system is off, it will answer after about 10 rings and sound a series of beeps instead of your greeting. 2. During the greeting (or beeps), press 0 and immediately enter your security code. (If you enter it incorrectly 3 times, the system hangs up and returns to standby.) 20 - English