Uniden DECT2188-3 English Owners Manual - Page 23

Using the Answering System Setting Up Your Answering System You can set up your answering system from any handset. To... Follow these steps Record your personal outgoing message or greeting Your greeting can be between 2 seconds and 30 seconds long. If you don't record an outgoing message, the system uses a pre-recorded greeting: Hello, no one is available to take your call. Please leave a message after the tone. 1. Press Messages/mute to access the answering system. Wait until the system finishes its announcements, or press 5 (stop) to skip them. 2. Press 8. 3. Wait for the system to say "Record greeting," then begin speaking. 4. When you're finished, press 8 to stop recording. The system plays back your new greeting. 5. To keep this greeting, press End. To re-record it, go back to step 2. Switch 1. Press Messages/mute to access the answering system. Wait between the until the system finishes its announcements, or press 5 pre-recorded (stop) to skip them. greeting & 2. Press 6. The system plays back the greeting it is currently your own using. greeting 3. Press 6 again to switch greetings. Delete your 1. Switch to your personal greeting following the steps above. greeting 2. While the system is playing back your greeting, press 4. Ans. Setup menu options You can change the answering system options from any handset. Just open the menu and select Ans. Setup. Security Code Ring Time Enter a 2-digit PIN so you can access your answering system from any touch-tone phone (see page 24). Set the number of rings (2, 4, or 6) before the answering system answers the phone. Choose Toll Saver (TS) to have the system pick up after 2 rings if you have new messages or after 4 rings if you don't. 21