Uniden DECT2188-3 English Owners Manual - Page 30

this problem. The technician who installed your DSL service might have left some filters for you; if not, call your DSL provider or look in any electronics store. Plug the DSL filter into the telephone wall jack and plug your phone's base into the filter. Make a test call to make sure the noise is gone. Telephone cord Telephone wall jack DSL filter Resetting and Registering Handsets If you are having trouble with a cordless handset or if you want to replace one, you need to clear the registration information from the base and the handset: Do you have the base the handset is registered to? Yes No 1. Press & hold End and # until the 1. Press & hold End and # until the System Reset menu appears System Reset menu appears (about 5 seconds). (about 5 seconds). 2. Select Deregister HS. The display 2. Select Base Unavailable. lists all registered handsets. 3. When the phone asks you to 3. Select the handset you want to confirm, select Yes. The handset reset. deletes its own link without 4. When the phone asks you to contacting the base. confirm, select Yes. The handset clears its information from the base & deletes it own link to the base. When you reset a handset (or if you buy a new one), that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it. Registering a handset 1. On the base, open the menu and select Register Handset. The display should say Handset Registering. 2. On the handset you want to register, press and hold Pound (#) until the handset display says Handset Registering (about 2 seconds). 3. In about 30 seconds, the handset display should say Registration Complete. Press Talk/flash and make sure you get a dial tone. 28