Uniden DFR6 User Manual - Page 5

UNIDEN LONG RANGE RADAR/LASER DETECTOR DETAILED USER'S MANUAL DFR6 FEATURES • Super Long Range Laser Radar Detection • Voice Notifications • Radar band frequency displays • Easy to read OLED display • Advanced K band filter • Invisible to VG-2™ and Spectre I/IV/IV+™ radar detectors; Spectre I and IV undetectable • Displays Signal Strength and Vehicle Battery Voltage INSTALL AND TURN ON DFR6 You can mount the DFR6 on the windshield (bracket included) or on the dashboard (hook and loop tape included). INSTALL Windshield When you mount the DFR6 on the windshield, mount it in the middle of the windshield between the driver and passenger. Be sure there are no obstructions and that there is a clear view through the back window. 1. Attach the rubber suction cups to the bracket and push the cups firmly onto the windshield. 2. Slide the unit onto the bracket until it clicks into place. 3. Plug the power cord into the DFR6 and plug the cigarette lighter adapter into the vehicle's cigarette lighter. 4. The DFR6 automatically turns on and runs through a self test cycle. Release the DFR6 from the bracket by pressing the Eject key on top of the detector. Dashboard The same types of mounting requirements for the windshield apply for mounting the unit on the dashboard. 1. Attach the unit to the dashboard using the hook and loop fastener tape. 2. Plug the power cord into the DFR6 and plug the cigarette lighter adapter into the vehicle's cigarette lighter. 3. The DFR6 automatically turns on and runs through a self test cycle. Pull the bracket from the dashboard, separating the hook and loop tape. TURN ON 1. Inert the power cord's RJ45 connector into the DFR6s power jack. 2. Insert the power cord's cigarette lighter adapter into the vehicle's cigarette lighter port. 3. The DFR6 automatically turns on and runs through a systems check. - 5 -