Uniden DXI4560-2 English Owners Manual - Page 3

Parts of the Base in use/ (in use/charge) LED / Voice mail waiting indicator (flashing) DC IN 9V jack TEL LINE jack [find] Charging contacts Parts of the Charger Charging contacts DC IN 9V jack (charge) LED 3) Installing the Phone Choosing the Best Location Before choosing a location for your new phone, here are some important guidelines you should consider: Avoid heat sources, such as radiators, air ducts, and sunlight Avoid noise sources such as a window by a street with heavy traffic Avoid television sets and other electronic equipment Choose a central location Avoid microwave ovens Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Avoid personal computers Avoid other cordless telephones • Choose a location close to both a phone jack and a continuous power outlet (one which is not connected to a switch). • Keep the base and handsets away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting. • For better reception, place the base as high as possible. You can place the base on a desk or table top or mount it on the wall. • Place the base in an open area for optimum range and reception. • If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer. Installing the Battery Note: Use only the Uniden BT-1006 rechargeable battery pack supplied with your phone. 1 Remove the cover. 2 Connect the battery pack with the correct polarity. Press down Use the finger indention for a better grip Slide the cover downward 3 Replace the cover. Red Red Black Black Wire Wire The connector notches fit only one way. Click Listen for a click to ensure connection. Slide upwards