Uniden EXAI918I English Owners Manual - Page 31
Setting the PIN Code, Setting Your Outgoing, Message OGM
View all Uniden EXAI918I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
6. Press the flash/function key again. Note: A beep indicates the new time is programmed and the new Time and Day Stamp is announced from the Base speaker. 7. You can proceed to set your PIN Code beginning with Step 3 under "Setting the PIN Code" or press the flash/function key once more to return to standby. Setting the PIN Code You must use your PIN code to access your Answering System from a touch-tone telephone. You can set a personal two-digit code (00-99) for your PIN code. 1. Press caller id on the Handset. 2. Press flash/function twice on the Handset. Setting Your Outgoing Message (OGM) When you receive a call, the Answering System answers and automatically plays either a preset message or your personal outgoing message (ogm). Preset Messages The EXAI918 has two messages programmed in its memory. If the rec time ANN/4/1 is set in the announce only position (ANN), then the first preset message below plays twice, and no incoming messages are recorded. If you select either the four minute or one minute (4/1) limit for incoming messages and have not recorded a personal outgoing message, then the second preset message below plays. • "Hello. No one is available to take your call." • "Hello. No one is available to take your call. Please leave a message after the tone." Note: A long tone sounds when you press the flash/function key the second time and PIN SET appears on the screen. 3. Enter the two-digit number you want to use as you PIN code. 4. Press flash/function again. A long tone indicates the new PIN number is programmed. 5. For example, to set the time to Tuesday at 3:20 PM, and your PIN code to 00, press caller id, then press flash/function followed by these keys: 3032 0#flash/function 00flash/function Note: If the rec time ANN/4/1 switch is in the "Announce Only" position, the Message Counter LED displays an A when the system is in Standby. Recording Your Personal OGM 1. To record an outgoing message, press and hold ogm. Start recording after the long tone. 2. Position yourself about 12 inches away from the base and speak clearly. EXAI918 27