Uniden EXAI918I English Owners Manual - Page 32

3. When you have finished recording, release the ogm button. You will hear a tone, and your message will play on the Base Unit speaker. Note: You can leave up to a 60-second outgoing message. Selecting a Preset OGM After you have recorded an outgoing message, you can set your Answering System to play either a preset message or your outgoing message. Setting the Toll Saver Switch The Ring Time/Toll Saver switch allows you to set the number of rings the caller hears before your Answering System answers. You can set the switch to answer after 2 or 4 rings. In the Toll Saver (TS) position, the Answering System answers after two rings when you have new messages recorded, and it answers after four rings if there are no new messages. So if you call long distance to check your new messages, you can hang up after the second ring and not be billed. 1. Press ogm. Your recorded outgoing message will begin to play. 2. While your recorded outgoing message is playing, press ogm again. A tone will sound, and you will hear one of the preset messages. After the message plays, a tone will sound again and the Answering System automatically returns to Standby. Note: The message, "Hello. No one is available to take your call" is played if the rec time ANN/4/1 is set to announce only. 3. To select your recorded message again, press ogm. Using the Reset Button If you find that your telephone answering system doesn't respond when you press its keys-for example, after a power outage-you can press the reset button to return your telephone answering system to normal operation. Note: Pressing reset does not erase your PIN (Personal Identification Number) code, Time Stamp, or the security code between the Handset and Base Unit. The preset message will begin to play on the Base Unit speaker. 4. While the preset message is playing, press ogm again. A tone will sound, and your recorded message will play. When your message finishes, a tone will sound again and the Answering System automatically returns to Standby. VOX/Calling Party Control Feature The Calling Party Control (CPC) feature allows your Answering System to disconnect and reset if the caller hangs up before leaving a message. This prevents your Answering System from using recording time to record a hang up/dial tone message. 28 EXAI918