Uniden EXP2905 English Owners Manual - Page 16

Basics Making calls 1 Pick up the handset from the base phone. TALK/BATT LOW LED VOL switch FLASH CHANNEL 2 Press TALK . The TALK/BATT LOW LED on the handset and the LINE LED on the base phone light up. Then you'll hear a dial tone. If you hear error beeps, move closer to the base phone. HOLD 3 Dial the phone number. *TONE REDIAL/P 4 When you're done talking, press OFF or replace the handset on the base phone. The TALK/BATT LOW LED on the handset and the LINE LED on the base phone go off. Additional tasks To Do this Put a call on hold Press HOLD . The TALK/BATT LOW LED flashes slowly. Press TALK to resume the conversation. Select a better channel Press CHANNEL . Adjust the handset Volume Set the VOL switch to H (high), M (middle) or L (low). Switch to tone dialing Temporarily Press *TONE while using the telephone after you're connected. The line remains in tone dialing until disconnected. Switch to another call Press FLASH to access the flash function. ("call waiting" service*) Press FLASH again to return to the first caller. * You need to subscribe to the service from your telephone company. Notes • Before dialing, make sure you can hear the dial tone, otherwise you cannot dial correctly. • When the TALK/BATT LOW LED repeats a set of two flashes, the base phone is in use. • When you set the handset volume to H (high), the volume will be raised considerably. Under normal circumstances, set the volume to M (middle). 16 Basics