Uniden EXP2905 English Owners Manual - Page 19

Receiving calls TALK/BATT LOW LED VOL switch HOLD FLASH 1 When you hear the phone ring; • Press TALK (or any key except OFF ). or • Pick up the handset from the base phone when the handset is placed on the base phone. The TALK/BATT LOW LED on the handset and the LINE LED on the base phone light up. Basics *TONE Additional tasks CHANNEL 2 When you're done talking, press OFF or replace the handset on the base phone. The TALK/BATT LOW LED on the handset and the LINE LED on the base phone go off. To Do this Put a call on hold Press HOLD . The TALK/BATT LOW LED flashes slowly. Press TALK to resume the conversation. Select a better channel Press CHANNEL . Adjust the handset volume Set the VOL switch to H (high), M (middle) or L (low). Switch to tone dialing temporarily Press *TONE while using the telephone after you're connected. The line remains in tone dialing until disconnected. Switch to another call Press FLASH to access the flash function. ("call waiting" service*) Press FLASH again to return to the first caller. Turn on/off the ringer of the handset See "Setting the ringer type" on page 23. * You need to subscribe to the service from your telephone company. Receiving calls through the speakerphone When the phone rings, press SPEAKER on the base phone. The SPEAKER LED and the *TONE LINE LED LINE LED light up. "- -" appears on the display. To adjust the speaker volume, press VOL or VOL . When you are done talking, press SPEAKER again. HOLD To obtain the best speakerphone performance, see page 18. SPEAKER LED To adjust the ringer volume, see page 24. FLASH VOLUME control SPEAKER Basics 19