Uniden EXP2905 English Owners Manual - Page 33

Troubleshooting If you've experienced any of the following difficulties while using your phone, use this troubleshooting guide to help you remedy the problem. Should any problem persist, call our customer hotline at 1-800-297-1023. Making calls Symptom You hear five short error beeps when you press TALK . You hear no dial tone. The phone does not connect at all, even though the number you have dialed is correct. The phone does not redial correctly. The handset does not ring. The base phone does not ring. You hear interference during conversation. You hear a beep every three seconds during the conversation. Remedy • Make sure you have set up the base phone correctly (page 8). • Move the handset closer to the base phone. • Replace the handset to the base phone for a while to reset the random security code. • Make sure the telephone line cord is securely connected to the telephone outlet. • Make sure the battery is fully charged (page 11). • Make sure the dialing mode is set correctly (page 10). • Before dialing, make sure you hear a dial tone. • Make sure the last dialed number is really the one you want to dial. • Make sure the ringer is turned on (page 23). • The battery may be weak. Charge the battery for 15-20 hours (page 11). • Make sure you have set up the base phone correctly (page 8). • Move the handset closer to the base phone. • Replace the handset to the base phone for a while to reset the random security code. • Make sure the telephone line cord is securely connected to the telephone outlet. • Make sure the ringer is turned on (page 24). • Move the handset closer to the base phone. • Place the base phone away from noise sources (page 8). • Press CHANNEL for a channel that gives better reception. • The battery is weak. Charge the battery for 15-20 hours. Receiving calls During conversation Additional Information continued Additional Information 33