Uniden EZX290 English Owners Manual - Page 21

If... The voice message icon won't go away. I can't register a handset. Try... - Resetting the Voice Message Waiting Indicator (see page 17). - Seeing if you already have 6 handsets registered to this base. - Resetting the handset. Weak or Hard To Hear Audio If a caller's voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset's battery may be weak.  Try moving around while you're on a call or moving closer to the base to see if the sound gets louder.  Make sure the handset's battery is fully charged.  Try adjusting the volume of the earpiece or the audio tone (see below). Adjust the audio tone During a call, press Tone to cycle through the three audio tone options: High Tone, Natural Tone (recommended for hearing aid users), or Low Tone. (The tone setting appears in the display as you do this.) You may have to experiment to figure out which audio tone works best for you. N�o�i�s�e��o�r��S�t�a�t�i�c�O��n��T�h�e��L�i�n�e� The most common cause of Do you have a T-Coil hearing aid? noise or static on a cordless If you have a hearing aid equipped with phone is interference. Here are a telecoil (T-coil) feature, the interaction some common household between the hearing aid and digital sources of interference:  electrical appliances, especially microwave ovens cordless phones can cause noise in the handset. If you have a T-coil hearing aid and you have problems with noise on the line, try turning on T-coil mode.  computer equipment, especially wireless LAN Open the menu. Select Handset Setup, then select T-coil. equipment and DSL modems  radio-based wireless devices, such as room monitors, wireless Using T-coil mode can shorten the handset's talk time; make sure to watch your battery status and keep the battery charged. controllers, or wireless headphones or speakers  large florescent light fixtures (especially if they give off a buzzing noise) 19