Uniden EZX290 English Owners Manual - Page 3

Installing Your Phone Charge the Battery ) Unpack all handsets, battery packs, and battery covers. If any battery cover is already on the handset, press in on the notch and slide the cover down and off. 2) Line up the red and black wires on the battery pack with the label inside the handset. Black ) Push the battery pack connector in Red until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected. ) Place the cover over the battery compartment and slide it up into place. ) Connect the base AC adapter to the AC IN 7.8V jack on the back of the base. Route the cord through the molded wiring channel as shown. ) If you have accessory handsets, connect a charger AC adapter to each charger's AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.) ) Plug the other end of each adapter into a standard 120V AC power outlet.