Uniden MHS75 English Owners Manual - Page 22

Specifications - specifications

Page 22 highlights

Problem Things to Try I can't hear anything from the speaker. Adjust the squelch level; it is probably too high. Noise comes out of the speaker all the time Adjust the squelch level; it is probably too low. I can transmit, but no Check your UIC channel settings: does the area one can hear me. you are in use different channel assignments? I'm not getting hazard alerts. Make sure Weather Alert Watch is turned on. The channel number on the display will flash if The display flashes, the radio is in a watch mode or in scan mode. and I don't know why. Try turning off scanning, Weather Alert Watch, Triple Watch, or Dual Watch (see page 6). Where can I find my The serial number is on a plate inside the radio's serial number? battery compartment. Specifications General Channels Freq. Control Freq. Tol. Oper. Temp. Antenna Microphone Display Speaker Power Source Size (without antenna) Weight All US/International/Canada marine channels 10 Weather channels PLL Transmit: 1.5 PPM (at 25°C) Receive: 1.5 PPM (at 25°C) -4°F (-20°C) to +122°F(+50°C) Flexible Whip Built-in Electret type Liquid Crystal Display 8Ω 0.5 Watt Rechargeable Lithium Ion Battery 7.4V 1040 mAh 4.57 (H) x 2.49 (W) x 1.53 (D) inch 116.2 (H) x 63.3 (W) x 39 (D) mm 10.2 oz (290g) (w/battery and antenna) E-18 Uniden MHS75 Radio Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

E-18
Uniden MHS75 Radio Owner’s Manual
Problem
Things to Try
I can’t hear anything
from the speaker.
Adjust the squelch level; it is probably too high.
Noise comes out of the
speaker all the time
Adjust the squelch level; it is probably too low.
I can transmit, but no
one can hear me.
Check your UIC channel settings: does the area
you are in use different channel assignments?
I’m not getting hazard
alerts.
Make sure Weather Alert Watch is turned on.
The display flashes,
and I don’t know why.
The channel number on the display will flash if
the radio is in a watch mode or in scan mode.
Try turning off scanning, Weather Alert Watch,
Triple Watch, or Dual Watch (see page 6).
Where can I find my
radio’s serial number?
The serial number is on a plate inside the
battery compartment.
Specifications
General
Channels
All US/International/Canada marine
channels
10 Weather channels
Freq. Control
PLL
Freq. Tol.
Transmit: 1.5 PPM (at 25°C)
Receive: 1.5 PPM (at 25°C)
Oper. Temp.
-4°F (-20°C) to +122°F(+50°C)
Antenna
Flexible Whip
Microphone
Built-in Electret type
Display
Liquid Crystal Display
Speaker
8Ω 0.5 Watt
Power Source
Rechargeable Lithium Ion Battery
7.4V 1040 mAh
Size (without antenna)
4.57 (H) x 2.49 (W) x 1.53 (D) inch
116.2 (H) x 63.3 (W) x 39 (D) mm
Weight
10.2 oz (290g) (w/battery and antenna)