Uniden SOLARA DSC English Owners Manual - Page 27

Specification - mounting bracket

Page 27 highlights

Specification General Channels Controls Status Indicators Channel Display Buttons Connectors Size Weight Supply Voltage Standard Accessories Antenna Impedance Microphone Speaker Operating Temperature Range Shock and Vibration FCC Approvals Transmitter Power Output Power Requirement Modulation Hum and Noise Signal-to-Noise Audio Distortion Spurious Suppression Output Power Stabilization Frequency Range Frequency Stability Receiver Frequency Range Sensitivity Circuit Squelch Sensitivity Spurious Response Adjacent Channel Selectivity Audio Output Power Power Requirement IF Frequencies : All International, U.S.A. and Canadian channels, plus 10 Weather channels : On-Off/Volume, Squelch : TX (Transmit), HI (High), LO (Low), SCAN, ALERT, WX, USA, INT, CAN, DSC, (GPS), and Channel Display : LCD with Orange backlight : 16/9, DISTRESS, DSC, SELECT, HI/LO/SCAN/UIC, WX/ALERT/UIC, CHL or M : Antenna, ACC, and DC cord : H63 mm x W160 mm x L168 mm (W/O Heat Sink) H2.52 inches x W6.4 inches x L6.72 inches : 920 g / 2.03 lbs / 32.4 oz : 13.8V DC negative ground : Mounting bracket and hardware, microphone hanger, spare fuse : 50 Ω nominal : Rugged 2 kΩ condenser mic element with coiled cord : 1.82 inch, Mylar Cone 8 Ω : -20 °C to + 50 °C (-4 °F to +122 °F) : Meets or exceeds EIA standards, RS152B and RS204C : Type accepted under part 80 of the Rules; meets Great Lakes Agreement and party boat requirements : 1 watt or 25 watt (switch selectable) : Not rated on LO, 25 watts output: [email protected] DC : FM ±5 kHz deviation (FCC designator F3E) : 45 dB@1 kHz with 3 kHz deviation with 1000 Hz modulating frequency (nominal) : Less than 8% with 3 kHz deviation with 1000 Hz modulating frequency : -35 dBm @ Hi, -23 dBm @ Lo : Built-in automatic level control (ALC) : 156 to 157 MHz : ±10 ppm @ -20°C to + 50°C : 156 to 163 MHz : 0.25 µV for 12 dB SINAD : Dual Conversion Super Heterodyne PLL : 0.2 µV Threshold : 85 dB : 67 dB @ ±25 kHz : 2.8 watts (10% Distortion) : 270 mA @ 13.8V DC squelched, 0.6A @ 13.8V DC at maximum audio output : 1st 21.4 MHz, 2nd 455 kHz 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

25
General
Channels
:
All International, U.S.A. and Canadian channels,
plus 10 Weather channels
Controls
:
On-Off/Volume, Squelch
Status Indicators
:
TX (Transmit), HI (High), LO (Low), SCAN, ALERT,
WX, USA, INT, CAN, DSC,
(GPS), and Channel
Display
Channel Display
:
LCD with Orange backlight
Buttons
:
16/9, DISTRESS, DSC, SELECT,
HI/LO/SCAN/UIC, WX/ALERT/UIC, CH
or
Connectors
:
Antenna, ACC, and DC cord
Size
:
H63 mm x W160 mm x L168 mm (W/O Heat Sink)
H2.52 inches x W6.4 inches x L6.72 inches
Weight
:
920 g / 2.03 lbs / 32.4 oz
Supply Voltage
:
13.8V DC negative ground
Standard Accessories
:
Mounting bracket and hardware, microphone
hanger, spare fuse
Antenna Impedance
: 50
nominal
Microphone
:
Rugged 2 k
condenser mic element with
coiled cord
Speaker
:
1.82 inch, Mylar Cone 8
Operating Temperature Range
:
20
°
C to + 50
°
C (
4
°
F to +122
°
F)
Shock and Vibration
:
Meets or exceeds EIA standards, RS152B and
RS204C
FCC Approvals
:
Type accepted under part 80 of the Rules; meets
Great Lakes Agreement and party boat
requirements
Transmitter
Power Output
:
1 watt or 25 watt (switch selectable)
Power Requirement
:
Not rated on LO, 25 watts output: [email protected] DC
Modulation
:
FM ±5 kHz deviation (FCC designator F3E)
Hum and Noise Signal-to-Noise
:
45 dB@1 kHz with 3 kHz deviation with 1000 Hz
modulating frequency (nominal)
Audio Distortion
:
Less than 8% with 3 kHz deviation with 1000 Hz
modulating frequency
Spurious Suppression
:
35 dBm @ Hi,
23 dBm @ Lo
Output Power Stabilization
:
Built-in automatic level control (ALC)
Frequency Range
:
156 to 157 MHz
Frequency Stability
:
±10 ppm @
20
°
C to + 50
°
C
Receiver
Frequency Range
:
156 to 163 MHz
Sensitivity
: 0.25
µ
V for 12 dB SINAD
Circuit
:
Dual Conversion Super Heterodyne PLL
Squelch Sensitivity
: 0.2
µ
V Threshold
Spurious Response
:
85 dB
Adjacent Channel Selectivity
:
67 dB @ ±25 kHz
Audio Output Power
:
2.8 watts (10% Distortion)
Power Requirement
:
270 mA @ 13.8V DC squelched, 0.6A @ 13.8V DC
at maximum audio output
IF Frequencies
:
1st 21.4 MHz, 2nd 455 kHz
Specification