Uniden TRU341 English Owners Manual - Page 12

• You have 20 seconds after pressing memory to enter the number you wish to store. Otherwise, an error tone will sound. • Write down stored numbers on the supplied memo sticker. Using Your Phone Making and Receiving Calls Answer call Make call Hang up Redial Handset on Base Handset off Base When the phone rings, remove the handset Press any key. from the base. (AutoTalk) 1. Remove the handset from the base 1. Pick up the handset and press talk. and press talk. 2. The talk/battery low LED lights. 2. The talk/battery low LED lights. 3.Listen for the dial tone. 3.Listen for the dial tone. 4. Dial the number. 4. Dial the number. Return handset to the base, Press talk. (AutoStandby) or press talk. 1. Remove the handset from the base 1. Pick up the handset and press talk. and press talk. 2.Listen for the dial tone. 2.Listen for the dial tone. 3.Press redial to dial the last 3.Press redial to dial the last number dialed. number dialed. Storing a Number in Memory Your TRU341 phone has 10 memory locations for storing important telephone numbers. 1. Remove the handset from the base and press memory. The talk/battery low LED flashes. 2. Enter the phone number you want to store (up to 20 digits). 3. Press memory and enter a number (0-9) on the keypad for the memory location you want to use. You hear a long beep and the talk/battery low LED goes out indicating the number has been stored successfully. If you select any keys other than 0-9, the handset will beep rapidly and no number will be stored. [ 10 ] U S I N G Y O U R P H O N E