Uniden TRU3485 English Owners Manual - Page 13

Battery use time per charge, When the battery charge becomes low, Cleaning the charging contacts

Page 13 highlights

Battery use time (per charge) From fully charged • 6 hours continuous use. • 10 days when the handset is in the standby mode. When the battery charge becomes low When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the battery charge becomes low, "Low Battery" appears on the LCD. If you make a call, the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging. The built-in memory backup can hold numbers and names stored in the memory even if the battery pack is completely discharged. Cleaning the charging contacts To maintain a good charge, it is impor tant to clean the battery contacts on the handset and base unit with a dry cloth or a pencil eraser about once a month. Do not use any liquids or solvents. • Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call for charging the battery. • The redial memory numbers backup for up to 2 minutes while you replace the battery pack. • If you must replace the battery pack during a telephone call, complete the replacement of the battery pack within 30 seconds, and you can return to the original call. G E T T I N G S T A R T E D [ 11 ] GETTING STARTED

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

GETTING STARTED
[ 11 ]
GETTING STARTED
Battery use time (per charge)
From fully charged
• 6 hours continuous use.
• 10 days when the handset is in the standby mode.
When the battery charge becomes low
When the voltage of battery pack in the handset is very low
and needs to be charged, the phone is programmed to
eliminate functions in order to save power. If the battery
charge becomes low, “
Low Battery
“ appears on the LCD.
If you make a call, the handset beeps. Complete your
conversation as quickly as possible and return the handset
to the base unit for charging.
Cleaning the charging contacts
To maintain a good charge, it is important to
clean the battery contacts on the handset and
base unit with a dry cloth or a pencil eraser
about once a month.
Do not use any liquids or solvents.
• Even when the battery
pack is not being used, it
will gradually discharge
over a long period of
time. For optimum
performance, be sure to
return the handset to the
base unit after a
telephone call for
charging the battery.
• The redial memory
numbers backup for up
to 2 minutes while you
replace the battery pack.
• If you must replace the
battery pack during a
telephone call, complete
the replacement of the
battery pack within
30 seconds, and you
can return to the
original call.
The built-in memory backup can hold numbers and names stored
in the memory even if the battery pack is completely discharged.