Uniden TRU5885-2 English Owners Manual - Page 29

2) Press select/ch, "Store/Edit Name" appears. 3) Store the name (up to 16 characters) by using the number keypad. • See the "Steps for entering names and special characters" (see page 28). • Use call id/ and /RocketDial/ to move the cursor to the desired location. • Use xfer/del to delete characters as needed. • Press and hold xfer/del to delete all the characters. If a name is not required, go to step 4. 4) Press select/ch to store the name, "Store/Edit No." appears. 5) Press the number keypad to enter the phone number (up to 20 digits), press select/ch to store the number. 6) "Distinctive Ring" appears. Press + or - to move the pointer to one of the Distinctive Ring options, then press select/ch. If you choose not to store a "Distinctive Ring", simply select the "No Selectn" option. 7) "Speed Dial" appears. Press + or - to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0). If you choose not to store the name/number as a Speed Dial, simply select the "No Selectn" option. 8) Press select/ch. You will hear a confirmation tone and "Done!" appears on the display. • When the memory is full, you will hear a beep and "Memory Full" appears. You cannot store names and numbers. • The pause key counts as one digit. Pressing redial/p more than once increases the length of pause between numbers. • If you select a Speed dial location a number is already stored, the new number will replace the old number, and the old number will be stored as a phonebook location. P H O N E B O O K [ 27 ] PHONEBOOK