Uniden TRU8888 English Owners Manual - Page 76

TROUBLESHOOTING Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The in use LED won't illuminate • Make sure the AC adapter is plugged into the charger and wall outlet. when the handset is placed in • Make sure the handset is properly seated in the cradle. the cradle. • Make sure the charging contacts on the handset are clean. The audio sounds weak. • Move the handset and/or base away from metal objects or appliances and try again. • Make sure that you are not too far from the base. Can't make or receive calls. • Make sure that you are not too far from the base. • Make sure the line is not in use. If call is already using a line, you cannot use that line to make another outside call. • Check both ends of the base telephone line cord. • Make sure the AC adapter is plugged into the base and wall outlet. • Disconnect the AC adapter for a few minutes, and then reconnect it. • De-register the handset (see "De-register the Handset" on page 14) and register the handset (see "Register the Handset" on page 13). The handset doesn't ring or receive a page. • Make sure that you are not too far from the base. • Charge the batteries in the handset for 15-20 hours by placing the handset on the base or charging cradle. • De-register the handset (see "De-register the Handset" on page 14) and register the handset (see "Register the Handset" on page 13). During power failure, can't make • Make sure to use corded base handset to make or receive a call. or receive a call. • Make sure that TEL line code is connected firmly. [75] TROUBLESHOOTING www.uniden.com