Uniden TXC580 English Owners Manual - Page 3
Install the Battery Pack, Battery Information - handset
UPC - 050633260043
View all Uniden TXC580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Install the Battery Pack Charge the battery pack for at least 15-20 hours before completing the installation or using the handset. 1 Press down on the battery cover release and slide the cover down until it comes off. 2 Connect the battery pack connector observing the correct polarity (black and red wires) to the jack inside the battery compartment. Do not exert any force on this connection. It could cause damage to the battery or to the handset. The plastic connectors will fit in only one way. Once you are certain that you have made a good connection, then insert the battery pack into the battery compartment. Do not pinch the wires. 3 Securely close the battery compartment cover by sliding it until it snaps into place. 4 Place the handset in the charging cradle with the keypad facing forward. • Use only the Uniden battery (BT-446) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department (See page 2). • Recharge your handset on a regular basis by returning the handset to the charger after each phone call. Battery Information Battery use time (per charge) From fully charged (15-20 hours charge time) • 4 hours continuous use • 8 days when the handset is in the standby mode -3-