Uniden UBW2101 Owners Manual - Page 12
II. Get to Know the Main Menu cont'd
View all Uniden UBW2101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Advanced Operation (cont'd) II. Get to Know the Main Menu (cont'd) Pairing - Pairing a Camera 1. Use ◄ / ► to select a channel. 2. Press OK to start system countdown from 60 seconds. 3. Within the 60 second countdown, press PAIR at the camera side. The camera signal will display when pairing is complete. Power Saving - Power Saving Use ◄ / ► to turn Power Saving mode ON/OFF. If VOX is turned on, the receiver and camera will come out of Power Save mode when sound is detected according to the set sensitivity level. This means at night, the monitor LCD will be off, but will automatically turn on when a noise is detected. ## By setting Power Saving mode ON, both receiver and camera will enter standby mode after 2-minute idle time, and speaker volume will be muted. Press the power key of the receiver to resume monitoring, and camera key to enter single channel view. SD Card Format - SD Card Format Use ◄ / ► to select No or Yes. ## For first time use, it is strongly recommended to format the SD card. 12