Uniden UBW2101 Owners Manual - Page 7

Getting Started (cont'd) Installing the Camera on the Goose Neck Mount Stand Use the goose neck mount stand to install the camera at an appropriate angle in a semi-permanent (desktop mount option) or permanent (wall mount option) location. ## Ensure the install location is within range of a standard 120 V AC wall outlet. Desktop mount option 1. Select the position for the camera and secure the camera stand. Wall mount option 1. Select the position for the mount stand and mark out the mount holes. The two wall screws should be spaced 1-5/8 in. (40mm) apart. Screws and anchors are supplied, but if necessary, use an appropriate screw type for the mounting surface. Lock Nut Cord Guides 2. Mount the camera onto the bracket, but do not tighten. 3. Adjust the camera to the proper view angle. Make sure the lens is upright relative to your subject, then tighten the lock nut to secure the camera. 4. Connect the AC adapter, and route the cord along the guides in the stand. 5. At the LCD monitor, adjust the antenna to an upright position. Step 2: Basic Operation I. Get to Know The Camera PWR. 7 DC IN 5V/1A