Uniden UC100B-DC English Owner Manual - Page 3
Installation
 |
View all Uniden UC100B-DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
REAR NO. DESCRIPTION NO. DESCRIPTION 1 Mounting Base 7 Memory Card Slot 2 Back Case 8 Power Supply Interface 3 Sun Shield 9 10/100M SelfAdaptive Ethernet Interface 4 Lens 10 PoE Cable 5 Adjusting Nut 11 GND Screw 6 WPSS/RESET Button INSTALLATION CONSIDERATIONS • Make sure the device in the package is in good condition and all the assembly parts are included. • The standard power supply is 12VDC (±25%) or PoE (802.3 af). Verify that your power supply matches your camera. • Make sure all the related equipment is off during the installation. • Make sure that the wall or ceiling is strong enough to hold the weight of the camera and the base. 3
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
3
REAR
NO.
DESCRIPTION
NO.
DESCRIPTION
1
Mounting Base
7
Memory Card Slot
2
Back Case
8
Power Supply
Interface
3
Sun Shield
9
10/100M Self-
Adaptive Ethernet
Interface
4
Lens
10
PoE Cable
5
Adjusting Nut
11
GND Screw
6
WPSS/RESET Button
INSTALLATION
CONSIDERATIONS
•
Make sure the device in the package is in good condition and all the
assembly parts are included.
•
The standard power supply is 12VDC (
±
25%
)
or PoE (802.3 af). Verify
that your power supply matches your camera.
•
Make sure all the related equipment is off during the installation.
•
Make sure that the wall or ceiling is strong enough to hold
the weight
of the camera and the base.