Uniden UM625C English Owners Manual - Page 22

Using Memory Channel, Scanning Memory Channels, Using Triple Watch

Page 22 highlights

• Pressing 16/9 TRI stops the radio from scanning if the radio is set to Scan mode. • The radio cancels Coast Guard/Distress/Hailing mode if you press WX, MENU/HELP, HAIL/INTERCOM, or STEP/SCAN, hold down STEP/SCAN or HAIL/INTERCOM, or rotate PUSH/SELECT. Using Memory Channel Saving Channels in Memory You can save channels you tune into the radio's memory. This makes it easy to quickly tune the channels again. To save a channel, tune to the channel then press MEM/UIC to save it. MEM appears. To delete a channel from memory, tune to the channel then press MEM/UIC. MEM disappears. Notes: • You cannot save a memory channel while in WX mode. • You must store more than one channel in the memory for the memory channel scan to work. Scanning Memory Channels You can scan channels you saved in the radio's memory. This lets you quickly access and tune them. To scan memory channels, hold down STEP/SCAN for about 2 seconds. SCANNING appears. If the radio detects a transmission on a scanned channel, the channel number blinks. The radio waits 3 seconds after the transmission ends then resumes scanning. To stop scanning, hold down STEP/SCAN for about 2 seconds or press PTT. Notes: • Rotating PUSH/SELECT clockwise resumes scanning if the radio stopped on a transmission. • Pressing DISTRESS also stops the radio from scanning. Using Triple Watch Triple Watch scans the selected working channel. Then, every 2 seconds, it moves to Channel 16 then Channel 9 in that order. If the radio detects a transmission on Channel 9 or Channel 16 while set to Triple Watch, the channel indicator blinks and the radio stops scanning for 2 seconds while you listen to that active channel. Hold down 16/9 TRI about 2 seconds to turn Triple Watch on or off. If Triple Watch is off, TRI appears and Triple Watch is enabled. If Triple Watch is on, TRI disappears and Triple Watch is disabled. Notes: • If Channel 9 is busy, the radio scans Coast Guard/Distress/Hailing Channel 9 and Coast Guard/Distress/Hailing Channel 16 in turn. • If you turn on Triple Watch and Channel 16 is busy, the radio receives Coast Guard/ Distress/Hailing Channel 16. 22 Basic Operation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

22
Pressing
16/9 TRI
stops the radio from scanning if the radio is set to Scan mode.
The radio cancels Coast Guard/Distress/Hailing mode if you press
WX
,
MENU/HELP
,
HAIL/INTERCOM
,
or
STEP/SCAN
, hold down
STEP/SCAN
or
HAIL/INTERCOM
, or rotate
PUSH/SELECT
.
Using Memory Channel
Saving Channels in Memory
You can save channels you tune into the radio's memory. This makes it easy to quickly tune
the channels again. To save a channel, tune to the channel then press
MEM/UIC
to save it.
appears. To delete a channel from memory, tune to the channel then press
MEM/UIC
.
disappears.
Notes:
You cannot save a memory channel while in WX mode.
You must store more than one channel in the memory for the
memory channel scan to work.
Scanning Memory Channels
You can scan channels you saved in the radio's memory. This lets you quickly access and tune
them. To scan memory channels, hold down
STEP/SCAN
for about 2 seconds.
SCANNING
appears. If the radio detects a transmission on a scanned channel, the channel
number blinks. The radio waits 3 seconds after the transmission ends then resumes
scanning. To stop scanning, hold down
STEP/SCAN
for about 2 seconds or press
PTT
.
Notes:
Rotating
PUSH/SELECT
clockwise resumes scanning if the radio stopped on a
transmission.
Pressing
DISTRESS
also stops the radio from scanning.
Using Triple Watch
Triple Watch scans the selected working channel. Then, every 2 seconds, it moves to Channel
16 then Channel 9 in that order. If the radio detects a transmission on Channel 9 or Channel 16
while set to Triple Watch, the channel indicator blinks and the radio stops scanning for 2 sec-
onds while you listen to that active channel.
Hold down
16/9 TRI
about 2 seconds to turn Triple Watch on or off. If Triple Watch is off,
appears and Triple Watch is enabled. If Triple Watch is on,
disappears and Triple Watch is
disabled.
Notes:
If Channel 9 is busy, the radio scans Coast Guard/Distress/Hailing Channel 9 and Coast
Guard/Distress/Hailing Channel 16 in turn.
If you turn on Triple Watch and Channel 16 is busy, the radio receives Coast Guard/
Distress/Hailing Channel 16.
MEM
MEM
TRI
TRI
Basic Operation