Uniden UM625C English Owners Manual - Page 41
Using the WHAM and WHAM x, Sub Menus
View all Uniden UM625C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Using the WHAM and WHAM x 4 Sub Menus (Wireless Handheld Access Microphone) This option lets you set up a WHAM (900MHz - up to 2 mics) or WHAM x 4 (2.4GHz - up to 4 mics) wireless microphone to operate with the radio. You must first set up a WHAM or WHAM x 4 microphone before it will work with the radio. Note: Refer to your WHAM or WHAM x 4 microphone's owners manual for more information about connecting it to the radio. WHAM units use a control or base unit, external to the radio. WHAM x 4 do not. A sub unit is another radio on board. Rotate PUSH/SELECT to select WHAM x 4 or WHAM, then press PUSH/SELECT to select it. If you have already connected a WHAM control (base) unit to the radio, BASE ID and LINK CH appear. Wen you connect a WHAM unit, a mic icon appears in the lower left of the channel display screen. If you have not connected a WHAM base unit to the radio, BASE ID, BASE/SUB, CHANGE LINK, and RENAME appear. To set up a WHAM x 4 Base ID, see "Setting a WHAM x 4 Base ID" on Page 41. To set up a WHAM x 4 base/sub, see "Setting the WHAM x 4 Sub Radio Mode" on Page 41. To set up a WHAM Base ID, see "Setting a WHAM Base ID". To set up a WHAM link channel, see "Changing the Radio Link Channel for a WHAM x 4" on Page 42. Setting a WHAM x 4 Base ID The base ID between the radio and the WHAM x 4 microphone you are installing must be the same. 1. Rotate PUSH/SELECT to select BASE ID, then press PUSH/SELECT to select it. BASE ID and a channel number appear. 2. Rotate PUSH/SELECT clockwise to move forward through the displayed numbers or counterclockwise to move backward. When the desired number appears, press PUSH/ SELECT to select it. A confirmation screen appears. 3. If the base ID you set appears correctly, rotate PUSH/SELECT to select YES. The radio saves the base ID you input. Otherwise, rotate PUSH/SELECT to select NO. Setting the WHAM x 4 Sub Radio Mode You can set up the radio so connected WHAM x 4 microphones can communicate with each other. 1. Rotate PUSH/SELECT to select BASE/SUB, then press PUSH/SELECT to select it. BASE RADIO and SUB RADIO appear. 2. To turn on the sub radio mode, rotate PUSH/SELECT to select SUB RADIO, then press PUSH/SELECT to confirm it. The sub radio mode is turned on. Otherwise, to turn off the sub radio mode, rotate PUSH/SELECT to select BASE RADIO, then press PUSH/SELECT to confirm it. Using the Setup Screen 41