Uniden UM625C English Owners Manual - Page 36
Setting the Local Time - Time Adjust and Time Entry, Setting the Position, Setting Daylight Saving
View all Uniden UM625C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Setting the Local Time - Time Adjust and Time Entry If you connect an optional GPS module to the radio, the radio automatically sets the local time. Follow these steps to manually enter the local time. 1. Rotate PUSH/SELECT to select TIME ADJUST, then press PUSH/SELECT to select it. A menu screen appears to let you select AUTO or MANUAL. In AUTO the radio checks the current time zone and adjusts the local time automatically. If you select MANUAL, you can fine tune the local time from the GPS plus or minus one hour. 2. Rotate PUSH/SELECT clockwise to set the time forward or counterclockwise to set it backward. When the desired time appears, press PUSH/SELECT to select it. 3. If no GPS is attached, rotate PUSH/SELECT to TIME ENTRY. Press to select it. If the local UTC time appears correctly, rotate PUSH/SELECT to select YES. The radio sets the local UTC time to the time you set. Otherwise, rotate PUSH/SELECT to select NO and re-enter the correct UTC time. Setting the Position To manually set (no GPS connected) the radio's position, rotate PUSH/SELECT to POS ENTRY and select it. Enter your latitude and longitude. Notes: • To save the UTC time as well as the latitude, and longitude you entered, at the completion of your entry, select YES to keep your entry or NO to discard them. • When you set the time in this mode, be sure to set it to the current UTC time, not local time. • If the radio does not receive valid GPS data for at least 4 hours, it sounds a tone and PLEASE INPUT UTC TIME AND POSITION appears. Refer to the start of this section for setting the position manually and the section above that for manual time setting. Setting Daylight Saving Time 1. Rotate PUSH/SELECT to select DAYLIGHT SAVE, then press PUSH/SELECT to select it. DAYLIGHT SAVE and a confirmation screen appear. 2. To set the radio to daylight saving time, rotate PUSH/SELECT to select ON. The radio adjusts the displayed time for Daylight Saving Time. Otherwise, rotate PUSH/SELECT to select OFF. Setting Units This option lets you adjust the displayed bearing and distance/speed units . 1. Rotate PUSH/SELECT to select UNITS, then press PUSH/SELECT to select it. A screen showing the unit options appears. 2. To set the unit for bearing, select BEARING. Otherwise, to set the unit for distance/speed, select DIST/SPEED. 3. Rotate PUSH/SELECT clockwise to set the desired unit, then press PUSH/SELECT to select it. 36 Using the Setup Screen