Vaddio EasyUSB Table MicPOD EasyTalk Solutions Manual - Page 19

EasyTalk USB Tools System Connection Diagrams The EasyTalk USB Solution can be used in a wide range of conferencing applications with the flexibility to work in both new and existing installations. The product supports plug-and-play installation with user selectable dip switches associated with audio mixing modes and advanced signal processing. The EasyUSB Mixer/Amp is designed to support both the EasyMic MicPOD (tabletop version) and EasyMic Ceiling MicPOD (ceiling version) in any combination. The applications below depict common conferencing applications and configurations that can be supported with the EasyTalk USB solutions. PC-based USB Conferencing Application: The diagram below depicts a typical EasyUSB connection diagram when used with PC soft-clients (Jabber, Skype, Lync) for the group audio system. The EasyMics are connected to the EasyUSB Mixer/Amp with CAT-5 cable and speaker outputs are connected to the EasyTalk Sound Bar. The USB connection to the PC is a UAC device allowing selection of EasyUSB Mixer/Amp as the playback and recording device within the operating system. Diagram: PC with USB 2.0 Basic Conferencing Connection Diagram EasyUSB Mixer/Amp Front Panel Mixer/Amp EasyUSB Mixer/Amp Rear Panel PC with UC Client Software USB 2.0 Cable Uses UAC (Universal Audio Class) Drivers + _+ _ Supplied CAT-5e Cables Two (2) 25' (7.62m) Cables Two (2) EasyMic MicPOD Table Mics 8 ohm + _ Supplied Speaker Wire Two 6' (1.8m) Cables Included + _ 8 ohm EasyTalk Sound Bar - Rear View Left and Right Channels Used Vaddio EasyTalk USB Solution - Document Number 342-0449 Rev B Page 19 of 48