Vaddio RoboSHOT 30 RoboSHOT 12 and 30 QDVI System Manual - Page 11

RoboSHOT HD Cameras SYSTEM CONFIGURATION EXAMPLE The Quick-Connect DVI-HDMI-SR interface uses two (2) Cat-5e cables to supply power to the camera, return differential video from the camera while providing bi-directional control (RS-232) for the camera over a distance of up to 100' (30.48m). Diagram: Basic Connectivity Example of the RoboSHOT and the Quick Connect SR RoboSHOT Camera Connected to Quick-Connect DVI/HDMI-SR Interface, ProductionVIEW™ Precision Camera Controller and HD Monitor. Rear View of RoboSHOT Camera Network Connection for Camera Configuration and Control (web server or Telnet control). Two (2) Cat-5e cables between the Camera and the Quick-Connect DVI/HDMI SR Interface RS-232 Cat-5e Cat-5e ◄ Power to Camera Video to Interface ► 24VDC, 2.0 A Power Supply RS-232 Quick-Connect DVI/HDMI SR Interface HDMI or DVI Video ProductionVIEW Precision Camera Controller HD Monitor (Simulated Video Feed) PRE-INSTALLATION  Choose a camera mounting location while paying close attention to camera viewing angles, lighting conditions, possible line of site obstructions, and checking for in-wall obstructions where the camera is to be mounted. Always pick a mounting location that will optimize the performance of the camera.  The included RoboSHOT wall mount can be mounted directly to a 2-gang wall box or can be mounted to a wall using dry wall anchors. RoboSHOT HD Cameras - Document Number 342-0795 Rev A Page 11 of 44