Vantec NST-640S3R-BK User Guide - Page 14
JBOD Mode, NexStar HX4R, NexStar HX2R
View all Vantec NST-640S3R-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
JBOD Mode: This mode concatenates a series of physical drives as a single large volume; Hard Drives are combined into a storage capacity that is equal to the sum of each of the physical hard drives. Switching to this mode will prompt to initialize and format the hard disks. If you choose to add a second hard disk at a later time, you will need to format the entire array of disks again. NOTE: All data previously stored on the hard drive will be lost! Please back up all data to a separate storage before continuing. NexStar HX4R JBOD 1000GB JBOD 1500GB NST-640S3R-BK Port 1 Port 2 Port 3 Port 4 Drive A 250GB Drive B 250GB Drive C 250GB Equal Disks Drive D 250GB NexStar HX2R NST-640S3R-BK Port 1 Port 2 Port 3 Port 4 Drive A 250GB Drive B 250GB Drive C 250GB Unequal Disks Drive D 750GB JBOD ON JBOD 1000GB JBOD 1500GB NST-620S3R-BK Port 1 Port 2 Drive A 500GB Equal Disks Drive B 500GB NST-620S3R-BK Port 1 Port 2 Drive A 1000GB Drive B 500GB Unequal Disks JBOD ON RAID Mode Configuration 12