ViewSonic LS860WU - 5000 Lumens WUXGA Short Throw Laser Projector with 1.3x Opti - Page 35
Selecting an Input Source, Quick Auto Search, Input Source
View all ViewSonic LS860WU - 5000 Lumens WUXGA Short Throw Laser Projector with 1.3x Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Selecting an Input Source The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. If you want the projector to automatically search for the input source, ensure the Quick Auto Search function in the SYSTEM menu is On. The Input Source can also be manually selected by pressing one of the source selection buttons on the remote control, or by cycling through the available input sources. To manually select the input source do the following: 1. Press Source, and a source selection menu will appear. 2. Press / until your desired signal is selected and press Enter. 3. Once detected, the selected source information will be displayed on the screen for a few seconds. NOTE: If there are multiple devices connected to the projector, repeat steps 1-2 to search for another source. 35