ViewSonic LS860WU - 5000 Lumens WUXGA Short Throw Laser Projector with 1.3x Opti - Page 98
Light Source Information, Light Source Hour, Extending Light Source Life
View all ViewSonic LS860WU - 5000 Lumens WUXGA Short Throw Laser Projector with 1.3x Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Light Source Information This section will provided a better understanding of your projector's light source. Light Source Hour When the projector is being used, the duration (in hours) of light source usage is automatically calculated by the built-in timer. To obtain the light source hour information: 1. Press Menu to open the OSD Menu and go to: Advanced > Light Source Settings > Light Source Hours Information. 2. Press Enter and the Light Source Hours Information page will appear. 3. Press Exit to leave the menu. Extending Light Source Life To prolong light source life, you can adjust the following settings in the OSD Menu. Setting Light Source Mode Setting the projector in Eco, Dynamic Eco, or SuperEco+ mode reduces system noise, power consumption, and extends the light sources operational life. Light source Mode Normal Eco Dynamic Eco Custom Description Provides full light source brightness. Reduces light source power consumption by 20% and lowers brightness, and decreases fan noise. Reduces light source power consumption by up to 30% depending on the content's brightness level. Allows you to adjust the light source power to extend the light source life and decreases the fan noise. To set the Light Source Mode, open the OSD Menu and go to: Advanced > Light Source Settings > Light Source Mode and press / to select and press Enter. Setting Auto Power Off This allows the projector to turn off automatically after a set period of time once no input source is detected. Open the OSD Menu and go to: POWER MANAGEMENT > Smart Energy > Auto Power Off and press / to disable or adjust the time. 98