ViewSonic LS860WU - 5000 Lumens WUXGA Short Throw Laser Projector with 1.3x Opti - Page 36
Adjusting the Projected Image, Adjusting the Projector's Height and Projection Angle
View all ViewSonic LS860WU - 5000 Lumens WUXGA Short Throw Laser Projector with 1.3x Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Adjusting the Projected Image Adjusting the Projector's Height and Projection Angle The projector is equipped with one (1) adjuster foot. Adjusting the foot will change the projector's height and the vertical projection angle. Carefully adjust the feet to fine tune the projected image's position. Auto-Adjusting the Image Sometimes, you may need to improve the picture quality. To do this, press Auto Sync on the remote control. Within five (5) seconds, the built-in Intelligent Auto Adjustment function will re-adjust the Frequency and Clock values to provide the best picture quality. Upon completion, the current source information will appear in the upper left corner for three (3) seconds. NOTE: This function is only available when the PC D-Sub input source (analog RGB/ COMPUTER IN) is selected. Fine-Tuning the Image Size and Clarity To adjust the projected image to the size that you need, rotate the Zoom Ring. LS750WU LS850WU/LS860WU To improve the clarity of the image, rotate the Focus Ring. LS750WU LS850WU/LS860WU 36