ViewSonic M1-2 - 854 x 480 Resolution 300 LED 125 ANSI Lumens 1.2 Throw Ratio - Page 15
Power on by Power Bank Func°on
View all ViewSonic M1-2 - 854 x 480 Resolution 300 LED 125 ANSI Lumens 1.2 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Power on by Power Bank Function The projector can also be powered by a power bank. 1 2 15V/3A To power your projector: 1. Connect one end of the USB Type-C cable to the USB-C port of the projector. 2. Connect the other end of the USB Type-C cable to the power bank. NOTE: • The power bank should be 45W (15V/3A) at least, and support Power Delivery (PD) protocol output. Additionally, at 15V/3A the projector can be powered on and charge simultaneously. • Due to the IC protection mechanism, the USB-C charging function may stop briefly then continue later on. Using the Battery The battery level icon will show at the top right of the Home Screen. As the battery's power level runs low, the screen will show a "low battery message". Battery Usage Time Information Charging Usage Hours Battery Level Indicator (Charging) About 4.5 hours up to 6 hours (Battery Saving) up to 4 hours (Extended Eco) up to 3 hours (Eco) up to 2.5 hours (Full) During Charging: Flashing White LED light Full Charge: Solid White LED light 15