ViewSonic NMP-302w NMP-302w User Guide (English) - Page 23
Output Mode
View all ViewSonic NMP-302w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4. The On times assigned in time slots A-E are inclusive, as seen in the schedule assigned here: (Fig. 2.9.5) The exact playback time will are depicted by blue time, as shown in figure 2.9.6. Dark blue represents time overlaps between C/D and D/E. (Fig. 2.9.6) 2.10. Display settings Output Mode The default output mode is set to Panel. (Fig. 2.10.3) If you are connecting to a monitor via HDMI compatible port, refer to the device specifications for the best matching setting. Note: The signboard supports only one output device at a time. 16
16
4.
The
On
times assigned in time slots A-E are
inclusive
, as seen in the
schedule assigned here:
(Fig. 2.9.5)
The exact playback time will are depicted by blue time, as shown in figure 2.9.6.
Dark blue represents time overlaps between C/D and D/E.
(Fig. 2.9.6)
2.10. Display settings
Output Mode
The default output mode is set to
Panel
. (Fig. 2.10.3)
If you are connecting to a monitor via HDMI compatible port, refer to the
device specifications for the best matching setting.
Note:
The signboard supports only one output device at a time.