ViewSonic NMP-302w NMP-302w User Guide (English) - Page 31

2.15. System configuration - Factory reset If you forget your preset system password, you must reset the system to regain access to the signboard. Power/Status Using the reset button LED 1. Press and hold the reset button with a pen tip. 2. Reconnect the power cord. 3. Wait for 16 seconds or until the status LED flashes. Reset 4. Release the reset button and wait for system to initialize. USB x 2 Ethernet Using a USB mouse System reset will re-initialize the system, clear passwords, and return settings to their default values. Then, perform the following steps: 1. Connect a USB mouse. 2. Click on the Advanced button. The advanced configuration menu will be launched. (Fig. 2.6.1) 3. Click on System configuration, and then choose Factory default. 4. Click on OK button to reset to factory default. (Fig. 2.15.1) 24