ViewSonic PJ1065-2 User Guide - Page 12

Basic Operation The basic operations shown in Table 3 can be performed with the supplied remote control device or by way of the projector's control panel. Items indicated by (*) may be used from the control panel. Item INPUT SELECT POSITION RESET (*) MAGNIFY FREEZE Table 3: Basic Operation Description Select Input Signal (*): Press the INPUT button. RGB IN 1→RGB IN 2→DVI →VIDEO→S-VIDEO→COMPONENT VIDEO (→RGB IN 1) Select RGB Input: Press the RGB button. VIDEO/S-VIDEO/COMPONENT VIDEO→RGB IN 1/RGB IN 2/DVI RGB IN 1→RGB IN 2→DVI (→RGB IN 1) Select Video Input: Press the VIDEO button. RGB IN 1/RGB IN 2/DVI→VIDEO/S-VIDEO/COMPONENT VIDEO VIDEO→S-VIDEO→COMPONENT VIDEO (→VIDEO) • The selected signal name is displayed for approximately 3 seconds when the input signal is changed. Set/Clear Position Adjustment Mode: Press the POSITION button. The [ ] icon is displayed in the POSITION mode. Image Position Adjustment: Press the and buttons in the POSITION mode. • Valid only in the MAGNIFY mode if a video signal is input. • After approximately 10 seconds of inactivity the [ ] icon is extinguished and the POSITION mode will be cleared automatically. • and buttons may operate as the mouse control button. See page 4. Initialize Each Item: Select an item and press the RESET button. Initialize Position Adjustment: Press the RESET button and the POSITION mode. This function is valid only if a RGB signal is the input. • Valid except for the VOLUME, LANGUAGE, WHISPER and H PHASE. • The RESET button may operate as the mouse control button. Refer to page 4. Set MAGNIFY Mode: Press the MAGNIFY button. Move Magnified Area: Run the POSITION in the MAGNIFY mode. Adjust Magnification: Press the MAGNIFY button in MAGNIFY mode. Clear MAGNIFY Mode: Press the MAGNIFY button. • The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT SELECT or VIDEO, or by changing the input signal. Set/Clear FREEZE Mode: Press the FREEZE button. The [ ] icon is displayed, and the image will be frozen in the FREEZE mode. • The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE, Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the input signal. • Do not forget to clear frozen static images. NOTE: • Use the remote control device at a distance of approximately 5 m from the sensor on the front of the projector, and within a range of 30 °left-right. Strong light and obstacles will interfere with the operation of the remote control device. 10 ViewSonic PJ1065