ViewSonic PJ358 PJ358 User Guide - Page 15

Setting up Using a USB storage In order to view images stored in a USB storage, such as a USB memory stick, insert the device into the USB STORAGE port. For more information, please see the "USB STORAGE". Turn the projector off prior to removing the USB storage from the USB STORAGE port, to prevent some troubles. Connecting power supply 1. Put the connector of the power cord into the AC inlet of the projector. POWER indicator POWER 2. Firmly plug the power cord's plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. AC inlet AC IN Connector of the power cord to the outlet Please remember that when the AUTO ON function activated, the connection of the power supply make the projector turn on. WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the power cord's specified voltage range. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation. • Never modify the power cord. Using the security slot This product has the security slot for the Kensington lock. For details, see the manual of the security tool. WARNING ►Do not use the security slot to prevent the projector from falling down, since it is not designed for it. Security slot COMPUTER IN1 COMPUTER IN2 S-VIDEO VIDEO K NOTE • The security slot is not comprehensive theft prevention measures. It is intended to be used as supplemental theft prevention measure. ViewSonic PJ358 USB STORAGE USB LAN DC 5V 0.5A K 10 COM