ViewSonic PJ358 PJ358 User Guide - Page 31
IMAGE Menu
UPC - 766907248210
View all ViewSonic PJ358 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
IMAGE Menu IMAGE Menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. /'07=%1/276'4? 5'.'%6 2+%674' #52'%6 +/#)' 18'45%#0 +0276 8215+6+10 5'672 *215+6+10 5%4''0 *2*#5 126+10 *5 '#5;/'07 #761#&,756':'%76' Item Description Using the ▲/▼ buttons switches the mode for aspect ratio. For a PC signal or a signal from the USB STORAGE NORMAL ó 4:3 ó 16:9 ó SMALL ASPECT For a Video signal, s-video signal or component video signal 4:3 ó 16:9 ó 14:9 ó SMALL For no signal 4:3 (fixed) • This item can be selected only for a proper signal. • The NORMAL mode keeps the original aspect ratio setting. • Performing the automatic adjustment initializes the aspect ratio setting. OVER SCAN Using the ▲/▼ buttons adjusts the over-scan ratio. Large (It reduces picture) ó Small (It magnifies picture) • This item can be selected only for a video, s-video and component video signal. • When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. V POSITION Using the ▲/▼ buttons adjusts the vertical position. Up ó Down • This item cannot be selected for a signal from the USB STORAGE port. • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs please reset the vertical position to the default setting. Pressing the RESET button when the V POSITION is selected will reset the V POSITION to the default setting. • When this function is performed on a video signal, s-video signal, or component video signal of 525i (480i) or 625i (576i), the range of this adjustment depends on the OVER SCAN setting. It is not possible to adjust when the OVER SCAN is set to 10. H POSITION Using the ▲/▼ buttons adjusts the horizontal position. Left ó Right • This item cannot be selected for a signal from the USB STORAGE port. • Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs please reset the horizontal position to the default setting. Pressing the RESET button when the H POSITION is selected will reset the H POSITION to the default setting. • When this function is performed on a video signal, s-video signal, or component video signal, the range of this adjustment depends on the OVER SCAN setting. It is not possible to adjust when the OVER SCAN is set to 10. (continued on next page) ViewSonic PJ358 26