ViewSonic PJ510 User Guide - Page 28

INPUT Menu

Get ViewSonic PJ510 - SVGA LCD Projector PDF manuals and user guides
UPC - 766907013412
View all ViewSonic PJ510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

INPUT Menu With the INPUT menu, the items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the table below. Item Description COLOR SPACE Select a Color Space Mode: AUTO(S)Q(T)RGB(S)Q(T)SMPTE240(S)Q(T)REC709(S)Q(T)REC601 • This item can be selected only at a RGB input or a COMPONENT VIDEO input. • When the AUTO is selected, the optimum mode is automatically selected. However, it may not work well at some signals. In such a case, select the SMPTE240 or REC709 for HDTV signal. COMPONENT Select a Function of COMPONENT VIDEO Jacks: COMPONENT (S) Q (T) SCART RGB • When the SCART RGB is selected, the COMPONENT VIDEO jacks function as ports for a RGB input with a SCART cable. Refer to the section "Signal Connector Pin Assignment" of "TECHNICAL". VIDEO Select a Signal Type Mode: AUTO (S) Q (T) NTSC (S) Q (T) PAL (S) Q (T) SECAM (S)  (T) NTSC 4.43 (S) Q (T) MPAL (S) Q (T) N-PAL • This item performs only at a VIDEO input or a S-VIDEO input. For a COMPONENT VIDEO input, although this item is ineffective, the signal type is identified automatically even if the AUTO is not selected. For HDTV signals, refer to the HDTV item below • Selecting the AUTO automatically selects the optimum mode. However, it may not work well at a PAL60 signal and some other signals. If the picture becomes unstable (ex. a irregular picture, color lack), please select the mode depending on the input signal. • The AUTO operation requires approximately 10 seconds. FRAME LOCK Select the Frame Lock Mode: TURN ON (S) Q (T) TURN OFF • This function performs only at a RGB input with vertical frequency of 48 to 72 Hz. • When the TURN ON is selected, a moving picture is displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. 3D-YCS Select a 3D-YCS mode: STILL IMAGE (S) Q (T) NORMAL (S) Q (T) TURN OFF • This function performs only at a VIDEO input of NTSC 3.58. • NORMAL is the mode for images with a lot of motions like movies, and STILL IMAGE is the mode for images with few motions or completely still ones like slides. • When this function performs, the VIDEO NR function is ineffective 25 ViewSonic PJ510

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
25
ViewSonic
PJ510
INPUT Menu
With the INPUT menu, the items shown in the Table below can be
performed. Perform each operation in accordance with the instructions in the
table below.
Item
Description
COLOR SPACE
Select a Color Space Mode:
AUTO(
)
(
)RGB(
)
(
)SMPTE240(
)
(
)REC709(
)
(
)REC601
•
This item can be selected only at a RGB input or a COMPONENT VIDEO input.
•
When the AUTO is selected, the optimum mode is automatically selected. However, it may not
work well at some signals. In such a case, select the SMPTE240 or REC709 for HDTV signal.
COMPONENT
Select a Function of COMPONENT VIDEO Jacks:
COMPONENT (
)
(
) SCART RGB
•
When the SCART RGB is selected, the COMPONENT VIDEO jacks function as ports for a RGB
input with a SCART cable. Refer to the section “Signal Connector Pin Assignment” of
“TECHNICAL”.
VIDEO
Select a Signal Type Mode:
AUTO (
)
(
) NTSC (
)
(
) PAL (
)
(
) SECAM (
)
(
) NTSC 4.43 (
)
(
) M-
PAL (
)
(
) N-PAL
•
This item performs only at a VIDEO input or a S-VIDEO input. For a COMPONENT VIDEO input,
although this item is ineffective, the signal type is identified automatically even if the AUTO is not
selected. For HDTV signals, refer to the HDTV item below
•
Selecting the AUTO automatically selects the optimum mode. However, it may not work well at a
PAL60 signal and some other signals. If the picture becomes unstable (ex. a irregular picture,
color lack), please select the mode depending on the input signal.
•
The AUTO operation requires approximately 10 seconds.
FRAME LOCK
Select the Frame Lock Mode:
TURN ON (
)
(
) TURN OFF
•
This function performs only at a RGB input with vertical frequency of 48 to 72 Hz.
•
When the TURN ON is selected, a moving picture is displayed more smoothly.
•
This function may cause a certain degradation of the picture. In such a case, please select the
TURN OFF.
3D-YCS
Select a 3D-YCS mode:
STILL IMAGE (
)
(
) NORMAL (
)
(
) TURN OFF
•
This function performs only at a VIDEO input of NTSC 3.58.
•
NORMAL is the mode for images with a lot of motions like movies, and STILL IMAGE is the mode
for images with few motions or completely still ones like slides.
•
When this function performs, the VIDEO NR function is ineffective