ViewSonic PJD5155 PJD5153 User Guide English - Page 42
Using the projector in standby mode, Adjusting the sound, Turning off the Power On/Off Ring Tone
View all ViewSonic PJD5155 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under SOURCE > Standby Settings, and the cable connections are correctly made. For the connection methods, see the Connection chapter. Active VGA Out Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER IN 1. Active Audio Out Selecting On outputs an audio signal when the AUDIO IN and AUDIO OUT sockets are correctly connected to devices. Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page 15 for more details. Muting the sound 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Mute menu. 2. Press / to select On. If available, you can press and off. on the remote control to toggle the projector audio between on Adjusting the sound level 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio Volume menu. 2. Press / to select a desired sound level. If available, you can press or on the remote control to adjust the projector's sound level. Turning off the Power On/Off Ring Tone 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Power On/Off Ring Tone menu. 2. Press / to select Off. The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone. 35