ViewSonic PJD6211P PJD6211P User Guide (English) - Page 14

Replacing the Battery For the first time use: Remove the transparent insulation tape by pulling it before use. For battery change: 1. Push the catch to the left and remove the battery holder. 2. Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with the mark "+" is up. 3. Push the battery holder back into the remote control until you feel a click. Caution „ Risk of explosion if battery is replaced by an incorrect type. „ Dispose of used batteries according to the instructions. „ Make sure the plus and minus terminals are correctly aligned when loading a battery. „ Keep the battery out of the reach of children. „ Do not recharge the battery or expose the battery to fire or water. „ Do not dispose the used battery along with household waste. Dispose used batteries according to local regulations. „ Danger of explosion may happen if batteries are incorrectly replaced. Replace only with the same type recommended by the manufacturer. „ Battery should not be in or near to fire or water, keep batteries in a dark, cool and dry place. „ If suspect battery leakage, wipe out the leakage and then replace a new battery. If the leakage adheres to your body or clothes, rinse well with water immediately. ViewSonic PJD6211P 12