ViewSonic PJD6211P PJD6211P User Guide (English) - Page 24

Signal Type Specify the source to the COMPUTER IN 1/COMPUTER IN 2 terminal that you wish to project. „ Auto : Automatically detect the input signal type from COMPUTER IN 1 and COMPUTER IN 2 terminals. „ RGB : For VGA signal „ YCbCr/YPbPr:For component signal Lamp Hours Display the lamp's elapsed operating time (in hours). Lamp Hours Reset Reset the lamp Hour to 0 hours. Filter Mode Use this function to activate filter mode after the projector is installed an optional filter cover. Filter Hours Display the filter's elapsed operating time (in hours). „ When Filter Mode is turned on, the Filter Hours also turns on automatically. Filter Hours Reset Reset the filter Hour to 0 hours. Power Saving If no operation is performed for a specific period of time, projector will automatically turn off. Auto Source Automatically scan through all the input source. ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. „ This function will be unavailable when the DCR function is on. High Altitude Use this function to allow the fans operates at full speed continuously to achieve proper high altitude cooling of the projector. OSD Timeout Duration of OSD menu display countly starts (at idle state by second). Option (Computer / Video Mode) Blank Screen Blank the screen temporarily, and select the screen color when this function is active. Password ViewSonic PJD6211P 22