ViewSonic PJD7835HD PJD7830HDL User Guide English - Page 43
Phase, H. Size, Enter, Auto Sync, DISPLAY
View all ViewSonic PJD7835HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Displays the position adjusent page. This function is only available when a PC type input signal is selected. Phase Adjusts the clock phase to reduce image distortion. This function is only available when a PC type input signal is selected. H. Size Adjusts the horizontal width of the image. This function is only available when a PC type input signal is selected. Zoom Using the remote control 1. Press on the remote control to display the Zoom bar. 2. Press / to magnify the picture to a desired size. 3. Press repeatedly to magnify the picture to a desired size. 4. To navigate the picture, press Enter to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture. 5. To reduce size of the picture, press Enter to switch back to the zoom in/out functionality, and press Auto Sync to restore the picture to its original size. You can also press repeatedly until it is restored to the original size. Using the OSD menu 1. Press Menu and then press until the DISPLAY menu is highlighted. 2. Press to select Zoom and press Enter. The Zoom bar displays. 3. Repeat steps 3-5 in the section of Using the remote control above. 32